This is the PCB board (circuit board) of a Seagate Barracuda ES.2 Hard Drive
Firmware: Please read description to the right -->
Board #: 100475720
Locate the number imprinted on the edge of your PCB board (Circled red in the picture), it must say 100475720.
If this is a match, then we can make a clone of your board.
To make the clone, we will need you to fill this form, then ship your DAMAGED PCB (circuit board) to us. We will then copy the information from your PCB onto our PCB. We will then ship the working cloned PCB back to you. (To find out more, please read our article by clicking here.)
This process is necessary to ensure compatibility, it seems that newer Seagate boards have MANY different firmwares (even when they have the same firmware on the label), and is therefore very hard to match.
When to buy this item:
A common problem with Seagate Barracuda ES.2 drives is that it would suddenly stop being recognized by the computer, or be recognized as 0MBs. Normally, there is a decent chance that it could be the PCB at fault, but with 7200.11 drives, it usually is NOT the PCB, but a firmware problem instead. A data recovery professional is a better choice.
We recommend buying this item when you are sure it is the PCB. For example, if there was a power surge, or some components are obviously burnt, or the wrong power adapter was used to power up the drive. If the drive will not spin up at all, and wasn't dropped, chances of success with replacing the PCB are quite good.
There are no refunds with this purchase, so if you would like to describe the specific symptoms to us, please Contact us through our online form or at email@example.com, we will try our best to reply within 12 hours.
|Item Includes: circuit board, firmware transfer and installation instruction sheet
What this board is supposed to do for you:
If your hard drive has stopped working, chances are you have some important data stored on it. Sometimes the hard drive failure is caused by a circuit board failure. This product is made to be an identical and functional replacement for your circuit board, therefore repairing your hard drive and saving you expensive data recovery charges. Please note that hard drive failures are NOT always caused by circuit board failure, this board is not guaranteed to fix your hard drive.
1. This is just the hard drive PCB board, not the whole hard drive.
2. All hard drive PCB boards have been fully tested before shipment, there is no refund policy, but we offer an exchange if the board has obviously been damaged during shipping.
3. If you bought the wrong hard drive PCB board by accident, please inform us a.s.a.p.
4. To ensure compatibility, please follow the steps listed above carefully.
Our testing procedure and FAQs:
Click here to find out about our testing procedure and general FAQs
Click here for detailed information
Thank you very much for taking the time to look at our site. Remember, if you have ANY questions or concerns, please feel free to email us directly at firstname.lastname@example.org. We reply 99.99% of all emails/messages within 12 hours of receiving them. Thank you again for looking at our site and best of luck repairing your hard drive!